7-8/16 Princes St, Princes St Marina NEWPORT NSW 2106

Ph: (02) 9979 2325 * Fax: (02) 9979 1818 * Mob: 0439 795 650

email: shane@sbmarinetrimming.com.au

FAQs  
There are many common questions we are asked often. Here are a few that might help you to begin with.  
Q: Can I use my existing stainless framework?

A: Yes, we do lots of 'reskins'. If the frame and fittings are in good condition, there is no reason why we can't put a new cover on existing frames.

Q: Should I repair my existing covers?

A: We often do repairs but sometimes it really isn't worth it. In some instances, the thread that is holding the cover together can start to rot, and if the canvas is still in good condition, we are happy to re-stitch. If there has been a tear in the fabric, we can patch it as long as the surrounding material is in good condition. We also often put new zippers into jobs, which again is only viable if the surrounding fabric is intact. Quite often though, once the cover starts to wear, it is usually a sign that it is coming to the end of its life and new covers are inevitable. Unfortunately they don't last forever, and given the extreme conditions they are exposed to, they do deteriorate no matter how much uv resistance the materials have.

Q: Will the covers be waterproof?

A: Most of the fabrics we use have waterproof coatings when manufactured. When we stitch the fabric, the needle naturally makes small holes for the thread to pass through. When the cover is pulled onto the boat, the tension elongates the holes therefore creating potential for leakage. We find that after a few weeks, the cover settles in 'taking up' the holes and then should be waterproof again. Waterproof spray can be applied along the seams if leaking becomes a problem. If you go to our 'Cover Care' tab, there are maintenance tips to keep your covers in good condition, including re-applying the waterproof coating.

Q: Do I need to bring my boat to your marina at Newport?

A: If your boat is berthed or moored in Pittwater, we can come to you. If your boat is berthed or moored in the Harbour, you will need to bring your boat to us. We can arrange berthing at our marina or at a nearby mooring while the job is being done. We generally don't travel to the Harbour.

Q: Can you design a cover to provide more than one function?

A: Not normally. We custom make covers to fit a particular purpose. We find that if the design is altered to serve a few different purposes, it just doesn't work well. We think that it is better to do one job well rather than a few jobs badly!

Q: Do darker canvas colours fade faster than lighter colours?

A: The canvas we use has excellent uv resistance, and resists fading well. We have found that the darker colours do not fade faster than the lighter ones. The canvas will fade slightly over time, but keeping it clean and maintaining the waterproofing certainly helps it last much longer.

Q: How do I clean my covers?

A: For information on the cleaning and care of your covers, go to the 'Cover Care' tab on the left of the screen.

Q: Does SB Marine Trimming do interior cushions etc?

A: We don't do interior work, but we can recommend some very good marine upholsterers if you are interested in a obtaining a quote.

 
   

Yacht CoversPower BoatsMaterialsCover CareAbout UsContact UsHome